julianna kunstler

inspired by Giacometti

© JuliannaKunstler.com

WI State Standards:

  • AA Cr10h
    Investigate: Engage in critical thinking, problem solving, and research through elements and principles of art and design studio practices and processes.
    (aesthetics / problem solving)
  • AA Cr11h
    Plan: Formulate original concepts by practice, experimentation, and revision. (planning/experimentation)
  • AA Cr12h
    Make: Create works of art that introduce students to media, care of tools, and basic craftsmanship skills.
    (skills)

Learning objectives

  • Understand the expressive qualities of Giacometti’s figure sculptures.
  • Recognize basic human body proportions.
  • Use gesture and posture to communicate emotion or movement.
  • Construct a stable wire armature.
  • Build three-dimensional volume using aluminum foil.
  • Experiment with elongated and exaggerated proportions.
  • Develop intentional surface texture.
  • Consider physical and visual balance.
  • Create a sculpture that is expressive from multiple viewpoints.

How can the position of a figure communicate movement, emotion, or personality without facial expressions or detailed features?

In this project, you will create an expressive human figure inspired by the sculptures of Alberto Giacometti.

You will begin by constructing a simple wire armature that establishes the figure’s proportions, posture, and gesture. Then you will build up the figure using aluminum foil, creating an elongated, textured human form.

Your sculpture should communicate a sense of movement, emotion, or attitude through body language.

The emphasis is not on realistic anatomy or detailed facial features. Instead, you will explore how simplified proportions, gesture, and surface texture can create an expressive sculpture.


Artist Inspiration: Alberto Giacometti

Alberto Giacometti (1901–1966) was a Swiss sculptor known for his extremely thin, elongated human figures.

His sculptures often feature rough, heavily textured surfaces and simplified anatomical details.

Although his figures may appear fragile, they convey a powerful sense of human presence.

Many of his sculptures explore themes of isolation, movement, vulnerability, and the human condition.

Materials

  • Soft aluminum armature wire
  • Wire cutters and pliers
  • Aluminum foil
  • Cardboard or wood base
  • Hot glue or another suitable mounting method
  • Masking tape, if needed
  • Reference photographs of human poses
  • Sketchbook and pencil
  • Optional acrylic paint for a bronze or dark metallic finish

Project Requirements

Your completed Giacometti-inspired figure sculpture must include:

  • One full human figure
  • A constructed wire armature
  • A recognizable head, torso, arms, and legs
  • Intentional body proportions, including some elongation or exaggeration
  • A clearly expressive pose or gesture
  • Aluminum foil used to build three-dimensional volume
  • An intentionally rough or textured surface
  • A stable base or secure support
  • A sculpture that can be viewed from all sides
  • Careful craftsmanship and secure construction

Suggested height: Approximately 12–18 inches, depending on available wire and base materials.

examples:

STEPS

Step 1: Gesture and Body Language

Begin by exploring how the human body communicates without words.

Sketch several simplified figures in different poses.

Experiment with walking, reaching, leaning, stretching, standing, or bending.

Focus on the overall line of action, the imaginary line that describes the main direction and energy of a pose.

Avoid complicated poses that require extensive support.

Choose a pose that communicates a specific action, emotion, or attitude.

Choose an action word before designing the figure: walking, waiting, reaching, resisting, searching, celebrating, collapsing, balancing, or hesitating.

Your challenge is to communicate that action using only the figure’s posture, without props or facial expressions.

Step 2: Plan Your Figure

Study the human proportions diagram. In a traditionally proportioned adult figure, the head fits approximately 8 times into the total height of the body.

Pay attention to these important reference points:

  • Shoulders: Approximately 1½–2 heads from the top.
  • Elbows: Align approximately with the waist.
  • Wrists: Reach approximately the hip/crotch level.
  • Fingertips: Reach about halfway down the thighs.
  • Hips/crotch: Approximately 4 heads from the top.
  • Knees: Located approximately 6 heads from the top.
  • Feet: Reach the bottom of the 8th head.

Use these proportions as a starting point for sketching your figure’s pose.

Create a final gesture sketch.

Identify the major body parts and joints.

Pay attention to the relationships between the head, shoulders, hips, knees, and feet.

Consider which proportions you might exaggerate to create a Giacometti-inspired figure.

Elongated legs, a narrow torso, and thin arms can help create the characteristic appearance.

Remember: You should understand realistic proportions before intentionally exaggerating them.

Step 3: Construct the Wire Armature

An armature is an internal framework that supports a sculpture.

Cut your wire pieces:

  • One 24″ piece for the head and torso.
  • Two 16″ pieces for the arms.
  • One 20″ piece for the legs.
wire armature

Form the head. Fold the 24″ wire in half, creating a loop at the folded end for the head. Twist the two wire ends together below the loop to form the neck.

wire armature

Continue twisting the wires to establish the desired neck length.

wire armature

Attach the arms. Refer to your human proportions diagram to determine shoulder placement. Position one 16″ wire across the body just below the neck.

wire armature

Hold the shoulder area with flat pliers and continue twisting the body.

wire armature

Wrap the second 16″ wire around the shoulder area to secure the arms.

wire armature

Shape the arms. Twist the two wires together on each side to form the arms. Bend them at the elbows according to your planned pose. Finish each arm with a small loop for the hand.

wire armature

Trim any excess wire.

wire armature

Attach the legs. Position the 20″ wire at the hips. Secure it by twisting the body wires around it. Twist the wires together to form two separate legs.

wire armature

Form the feet. Bend the legs at the knees and ankles to create your planned pose. Finish each leg with a loop for the foot. Trim excess wire and tuck in any sharp ends.

Wrap the Armature

wrapping armature

Prepare the masking tape. Tear or cut several pieces of masking tape approximately 3–4 inches long.

wrapping armature

Wrap the figure. Starting with the torso, wrap the tape around the wire structure. Continue wrapping the arms, legs, neck, and head. Overlap the tape slightly to cover the wire and secure the connections.

Refine the pose. Check the proportions, adjust the position of the limbs, and make sure your figure can maintain its intended pose.

Remember: Keep the armature thin and simple. The wire establishes the structure and pose, while the masking tape holds the framework together and prepares it for the next stage of sculpting.

Step 4: Mount

wrapping armature

Attach the figure securely to a base.

wrapping armature

The base should support the figure without distracting from the sculpture.

Does the pose communicate the intended movement or emotion?

Is the weight distributed convincingly?

Does the figure appear to be standing, walking, leaning, or reaching?

Make adjustments to the posture and proportions.

A dramatic pose still needs a stable structure.

Step 5: Build the Form with Aluminum Foil

wrapping armature

Begin wrapping aluminum foil around the wire armature.

Use small pieces of foil to gradually build the head, torso, arms, and legs.

Compress the foil firmly around the wire so it holds its shape.

wrapping armature

Add more foil where the figure needs volume, especially around the shoulders, chest, hips, and head.

Keep the limbs relatively thin and elongated.

wrapping armature

Avoid making the figure bulky or overly realistic.

Build gradually. You can always add more foil, but removing tightly compressed layers is difficult.

Step 6: Develop the Surface Texture

wrapping armature

Giacometti’s sculptures are known for their rough, irregular surfaces.

Instead of smoothing every area, allow the foil to create interesting ridges, wrinkles, and variations.

Experiment with pressing, pinching, twisting, and compressing the foil.

Think about how the texture catches light and creates shadows.

Your goal is an expressive surface rather than a perfectly smooth finish.

wrapping armature

Add texture to the base using hot glue.

wrapping armature

Spread the glue to create an uneven, rough surface that complements the sculpture. Avoid creating decorative lines or patterns with the glue.

Check the sculpture for loose foil, exposed sharp wire ends, and unstable connections. Secure loose areas with hot glue if necessary.

Step 7: Refine the Gesture and Balance

Place your figure upright and examine it from all directions.

Step 8: Finish

giacometti inspired sculpture

Apply a coat of dark acrylic paint and subtle metallic highlights to suggest the appearance of aged bronze.

giacometti inspired sculpture

Apply additional coats as needed to achieve the desired finish.”

Use a dry brush to apply a metallic paint.

giacometti inspired sculpture

Assessment

Gesture and Expression: The figure communicates movement, emotion, or attitude through body language.

Proportion and Form: The sculpture demonstrates an understanding of the human figure while intentionally exaggerating proportions.

Armature Construction: The wire framework is securely connected and supports the sculpture.

Foil Construction: Foil is carefully shaped and compressed to create intentional three-dimensional forms.

Surface Texture: The sculpture demonstrates purposeful use of rough, expressive texture.

Balance and Stability: The sculpture is structurally stable and convincingly posed.

Craftsmanship: Materials are securely attached, the form is thoughtfully refined, and sharp wire ends are addressed.

Reflection Questions

What movement, emotion, or attitude were you trying to communicate?

How did you use the pose to express your idea?

Which proportions did you exaggerate, and why?

What challenges did you encounter when constructing the wire armature?

How did the aluminum foil change the appearance of your figure?

How does the surface texture contribute to the sculpture?

How is your sculpture inspired by Giacometti’s work?

What would you change or improve if you made another figure?

Copyright © 2008–2026 Julianna Kunstler